HOME

 

 

 

Describtion:                                                         Euro/DKK

 

 

Flycutting type 1 heads for more cc or comp ratio                                   100/750

up to 1,5 mm in dept

 

Flycutting type 1 heads for more cc or comp ratio                                   110/825

up more than1,5 mm in dept and cut fins.

 

Flycutting type 4 heads for more cc or comp ratio                                   100/750

up to 1,5 mm in dept

 

Flycutting type 4 heads for more cc or comp ratio                                   110/825

up more than 1,5 mm in dept and cut fins

 

Measure combustion chambers on one head type 1 and 4                      30/200

 

Flycut 2 type 1 or 4 heads for dual valve springs                                      40/300

 

Renew valve guides type 1 incl guides

STD or stock oversize only,

 

Renew valve guides type 4 intake guide incl guides

STD or stock oversize only,

 

Renew valve guides type 4 exhaust guide incl guides

STD or stock oversize only,

 

Flycutting type 1 case for larger cyl up to 92 mm                                      100/750

 

Flycutting type 1 case for larger cyl 94  mm incl decking                         125/950

 

Flycutting type 4 case for larger cyl                                                            100/750

 

Drill and tap type 1 case for full flow                                                            45/350

 

Drill and tap oil gallery plugs type 1                                                         from 4/60

 

Drill and tap oil gallery plugs type 4                                                         from 4/60

 

Cut 8 pushrods to specific length

(customer supplied numbers)

 

Cut 8 tapered pushrods to specific length                                           CALL/EMAIL

(customer supplied numbers)

 

Measure and set up rocker arm geometry                                          from 80/600

on customer's engine type 1 and 4.

 

Measure and set up rocker arm side play on                                               60/450

customer's heads and rockers type 1

 

Measure and set up rocker arm side play on                                               80/600

customer's heads and rockers type 4

 

Drill and tap braking 4 lug disc or drums for Porsche pattern                   33/250

pr unit. 

 

 

 

 

 

HOME

 

 

 

 

 

 

 

 

 

 

 

 

RMS Boxer Service  2010 Privacy Policy Terms Of Use